電話：0755-86131192
郵箱：info@3doe.com
地址：深圳市龍華區民治大道民治商會大廈六樓
PTS-A series (four - eye) photographic 3D scanner is suitable for industrial design, reverse engineering and dimensional 3D detection projects, non-contact structural optical measurement, camera imported from Germany, independent research and development of supporting software, to obtain the 3D external contour of objects with high precision and stability. Successful solutions are applied in the following fields: reverse 3D scanning and 3D detection of molds, sheet metal parts, large-scale casting parts, oil-clay models, injection parts, sculpting parts, auto parts, etc. Difference between binocular and quadruocular: The position of the binocular camera is adjustable, and the binocular can also have multiple sets of scanning range. Switching the scanning range requires recalibration. The quaternary has two scanning ranges namely two sets. Scan range can be switched freely. For example, an object scanned for 4 meters and then scanned for 1.5 meters can directly switch the scanning range without adjusting the camera Angle and calibration.
The PTS-A series (four mesh) photo-type 3D scanner includes two sets of scanning range. Objects of different scan sizes do not need to be recalibrated, and the scanning range can be switched directly. It is suitable for industrial design, reverse engineering and dimensional 3D detection projects, non-contact structural optical measurement, camera imported from Germany, independent research and development of supporting software, obtaining 3D external contour of objects with high precision and stability.
Successful solutions are applied in the following fields : reverse 3D scanning and 3D detection of molds, sheet metal parts, large-scale casting parts, oil-clay models, injection parts, sculpting parts, auto parts, etc.
Difference between binocular and quadruocular :
Binocular : The camera position is adjustable or can have multiple sets of scanning range. Switching scanning range requires recalibration.
Four -eyes: It has two scanning ranges, namely two groups, which can be switched freely. For example, after scanning an object of 4 meters, an object of 1.5 meters can be changed directly without adjusting camera Angle and correction.
Product Features:
hardware
1) Equipped with two sets (4) 1.3 megapixel industrial cameras imported from Germany. Within 5 seconds, 130W point cloud data with uniform distribution can be obtained on the surface of the object, with accuracy ≤0.05mm;
2) The two groups of scanning ranges coexist. Objects with different scanning sizes do not need to be recalibrated, and the scanning range can be directly switched.
3) Non-contact (white light) raster scanning technology, suitable for soft and easily deformed objects measurement requirements.
4) The equipment is small in size, occupies little space and has no noise, which can be easily brought to the measurement site.
5) It can be used with tripod, mechanical arm and turntable, flexibly adjust the position of the scanner, and adapt to the scanning of heavy and unmovable objects.
Photographic 3D scanner-measurement principle
The 3DOE 3D measuring head is composed of two high-resolution industrial CCD cameras on the left and right and a grating projection unit. The structured light measurement method is used to project a group of grating fringes with phase information onto the surface of the measured object using the grating projection unit. The two cameras on the left and right can measure simultaneously, and combine computer vision technology, photoelectric sensor technology, image processing technology and software control technology to obtain high-density three-dimensional data on the surface of the object in a very short time. The rotating object or scanning head is used to change the scanning angle of view. Based on the automatic splicing technology of multi-view point cloud, it can complete 360° scanning of the object in all directions.
Optional accessories
Automatic/manual turntable Calibration board Steering head Lifts
Developer Mark point Flight Case Tripod/Column
? Classic cases
3D scanning of castings
? Technical Parameters
Number of lenses | Four-eye type | |
Product number | PTS-A130-F400 | PTS-A130-F200 |
scanning method | Non-contact white light scanning | |
Single scan range (mm2) | 200 X150、400 X300 | 100X75、200 X150 |
Maximum measuring range (mm3) | 2000×1500×1500 | 1000 X750 X750 |
Measuring accuracy (mm) | 0.02～0.05 | 0.015~0.05 |
Single scan points (pixels) | 1,300,000×2 | |
Single scan speed | <5S | |
Average dot pitch (mm) | 0.07 ~ 0.3 | 0.04 ~ 0.15 |
Output file format | ASC, STL, OBJ, etc., can be connected with Geomagic, Imageware, 3Dmax, etc. | |
Splicing method | Automatic splicing of marked points, intelligent fusion into a single layer point cloud | |
? Application field
●Auto parts ●industrial design
●Reverse design（Scanner）
●Mold design and inspection
●Craft Scan ●Wood carving scan
●Game production
●Household appliances
●Electronic Products
●Teaching Research
●Cultural relics and archaeology
To understand the specific application, please feel free to consult online (message) or call 0755-86131192!
Provide system customized solutions!
深圳市精易迅科技有限公司www.3doe.com.cn 是一家長期致力于非接觸式三維掃描及檢測系統研發、銷售及服務一體化的專業三維數字化高科技公司。 我們是三維掃描儀研發生產廠家，擁有全自主知識產權，精易迅專注三維掃描技術研究25年。 國內早期的三維掃描技術研究機構，國際先進水平的計算機立體視覺技術以及公司自身發明專利。 擁有國內權威的三維掃描以及檢測系統等解決方案的提供商。
11年沉淀匯聚行業技術精英團隊 始終堅持追求細節完善品質
豐富三維制作的經驗 高效 省心 高端的3D技術制作 誠信 放心
中國具影響力的機構之一 三維掃描系統解決方案的提供商
2015-2020 精易迅版權所有
粵ICP備12037206號
粵公網安備 44030902002885號
深圳市精易迅科技有限公司
0755-86131192
0755-86131192